Хит
- 15 %
₾ 100 Первоначальная цена составляла ₾ 100.₾ 85Текущая цена: ₾ 85.
1 в наличии (может быть предзаказано)
Описание

სამფაზიანი ძაბვის სარელეო RNPP-311M.
VOLTAGE რევოლუციის, ფერის შეცვლა და ფენა
RNPP-311M

ეს მოწყობილობები გამოიყენება სამფაზიანი მოწყობილობების დაცვაზე დაბალი ხარისხისაგან
მაგისტრალური ძაბვა. დაყენებულია საკონტროლო კაბინეტებში და დენის ფარებზე. ფართო
გამოყენებული ავტომატური შეყვანის სარეზერვო switchboards როგორც ქსელის კონტროლის ორგანო.

იგი აკონტროლებს ფაზის როტაციის დარღვევას, ძაბვის ეფექტურ ღირებულებას.
იცავს 3 ფაზის ელექტრო მოწყობილობას ავარიებისგან:
— გამომავალი ძაბვის ღირებულებები ინსტალაციის ფარგლებს გარეთ
— თანმიმდევრობისა და ფრჩხილების ფაზების დარღვევა
— სრულფასოვანი და სიმეტრიული მაგისტრალური ძაბვის დარღვევა.

400/415 V- ის კონტროლირებადი ძაბვის არჩევანი
ფაზის როტაციის კონტროლის გამორთვა:
შედეგები და წებოვანი ფაზები;
— სრული ფაზა და სიმეტრიული მაგისტრალური ძაბვა;
— undervoltage;
— გაიზარდა ძაბვა.
სარელეო არის ნებისმიერი ABP სქემის შეუცვლელი ელემენტი, ისევე როგორც ენერგიის მართვის სქემები.

RNPP-311M განკუთვნილია:
— დასაშვები ძაბვის დონის კონტროლი;
— აკონტროლოს სწორი ცვლადი და არალეგალური ფაზების არარსებობა;
— მძლავრი ძაბვის სრული ფაზისა და სიმეტრიის კონტროლი (ფაზა სრიალი);
— დაბალი ხარისხის მაგისტრალური ძაბვის შემთხვევაში დატვირთვის გაწყვეტა;
— კონტროლი ხარისხის მაგისტრალური ძაბვის შემდეგ დატვირთვის shedding და ავტომატური გადართვის შესახებ
ძაბვის პარამეტრების აღდგენის შემდეგ;
— დაუყოვნებლივ მიუთითოს უბედური შემთხვევა და მიუთითეთ ძაბვის არსებობა
თითოეულ ეტაპზე.
RNPP-311M აკონტროლებს ნულს არაპირდაპირ მეთოდით.
პროდუქტი უზრუნველყოფს პარამეტრების მორგების შესაძლებლობას (ძაბვის ბარიერი,
AR დრო და დაცვა დაგვიანებით), კონტროლირებადი ქსელის ძაბვის შერჩევა (400 ვ
ან 415 ბ) და დამცავი ფუნქციების კომპლექტი.
ქსელის ძაბვის პარამეტრების აღდგენის შემდეგ, პროდუქტის ხელახლა გადატანა ARC- ს შემდეგ.

პროდუქტი განკუთვნილია შემდეგი პირობებით:
— მინუს 35-დან + 55 º -მდე ტემპერატურისა;
— ატმოსფერული წნევა 84-დან 106.7 კმ-მდე;
— შედარებით ჰაერის ტენიანობა (ტემპერატურა +25 ºС) 30 … 80%

ყურადღება! პროდუქტი არ არის განკუთვნილი გამოყენების შემდეგ პირობებში:
— მნიშვნელოვანი ვიბრაცია და შოკი;
— მაღალი ტენიანობა;
— აგრესიული გარემო შინაარსით ჰაერის მჟავების, ალკალის და ა.შ., ასევე მძიმე დაბინძურების საგანი
(ცხიმი, ზეთი, მტვერი და ა.შ.).

ºС) 30 … 80%

ВНИМАНИЕ! Изделие не предназначено для эксплуатации в условиях:
– значительной вибрации и ударов;
– высокой влажности;
– агрессивной среды с содержанием в воздухе кислот, щелочей, и т. п., а также сильных загрязнений
(жир, масло, пыль и пр.).

ტექნიკურ სპეციფიკაციები

სახელი Значение
ნომინალური ხაზოვანი / ფაზის მაგისტრალური მიწოდება ძაბვის, V 400 / 230, 415 / 240
ქსელის სიხშირე, Hz 45 – 65
ჰარმონიული კომპოზიცია (არასამთავრობო sinusoidal) მიწოდება ძაბვის ДСТУ EN 50160:2014
მაქსიმალური / მიწოდების ძაბვის ბარიერის რეგულირება, როგორც ნომინალური ძაბვის პროცენტული მაჩვენებელი 5 – 50
რეაგირების სპექტრი დაცვის საპასუხოდ დრო, s 0 – 10
AR- ს დროის რეგულირების დიაპაზონი 0 – 600
ფიქსირებული რეაგირების დაგვიანებით მინიმალური ძაბვისთვის 12*
რეაგირების დრო ერთი ფაზის შესვენების დროს, ერთად, აღარ 0,2
მზა ლოდინი, s, უფრო მეტი 0,2**
ფაზის სხივების განსაზღვრის სიდიდე, ვ 30
ძაბვის ჰისტერესის, ვ 5 – 6
ჰისტერესის ფაზის მიკერძოებულობაზე, ვ 5 – 6
ძაბვის ძაბვის განსაზღვრის სიზუსტე, V, არა 3
ფაზის სრილის განსაზღვრის სიზუსტე, არა, მეტი 2
ძაბვა, რომლის შესრულება შენარჩუნებულია:

— ერთ ფაზაში, В
— სამი ფაზაში, ვ

140 – 450
95 – 450
ენერგომოხმარება (დატვირთვის ქვეშ), W, არა 1,2
გამომავალი კონტაქტების მაქსიმალური ჩართვა, ა 5
გამომავალი კონტაქტის რესურსების გადართვა:

— დატვირთვის ქვეშ 5 А (cos φ = 1.0), ჯერ, არანაკლებ
— დატვირთვის ქვეშ 1 А (cos φ = 1.0), ჯერ, არანაკლებ

100 тыс.
1 млн.
პროდუქტის მიზანი Аппаратура управления и
распределения.
ნომინალური ოპერაცია Продолжительный
წინა პანელის დაცვის ხარისხი IP40
ტერმინალური ბლოკის დაცვა IP20
ელექტრო შოკი კლასი II
კლიმატური შესრულება УХЛ 3.1
დაბინძურების დასაშვები ხარისხი II
Overvoltage კატეგორია II
რეიტინგული საიზოლაციო ძაბვის, V 450
რეიტინგული იმპულსი გაუძლო ძაბვის, კვ 2,5
მავთულის ჯვარი განყოფილება ტერმინალებთან დაკავშირებით mmmm 0,5-1,5
მწვავე ბრუნვის ხრახნიანი ტერმინალი, N * მ 0,4
წონა, კგ, არა 0,100
საერთო ზომები (ნახ. 1), H * B * L, მმ 90,2*36*64,5
პროდუქტის მონტაჟი (სამონტაჟო) — სტანდარტული DIN სარკინიგზო 35 მმ
პროდუქტი ინარჩუნებს თავის მუშაობას სივრცეში ნებისმიერ პოზიციაში.
სხეულის მასალის — თვითმფრინავი პლასტიკური
შენიშვნები:
* — თუ უბედური შემთხვევა მინიმუმამდე მოხდა, პროდუქტის ფიქსირებული რეაგირების დრო
იქნება 12 s, იმ პირობით, რომ კონცენტრატორები Umax და Umin არიან მარცხენა პოზიცია.
ნებისმიერი კომბინაცია კომუტატორები Umax და Umin, პროდუქტი იმუშავებს მეშვეობით დაგვიანებით დრო,
მომხმარებლის განსაზღვრული სახელური Toff (წამი). თუ ამ დროს (12 ს) კიდევ ერთი შემთხვევა მოხდა,
მაგალითად, მაქსიმალური ძაბვის, პროდუქტი იმუშავებს მინიმუმ პერიოდებში — დროთა განმავლობაში
მომხმარებლის მიერ განსაზღვრული დაგვიანებით, ან 12 საათის შემდეგ დარჩენილი დროით.
** — «Overvoltage control» რეჟიმში მუშაობისას მზადყოფნა მზად არის 0.3 სთ.

MANUFACTURER OF SERVICE სიცოცხლე და გარანტია

პროდუქტის სერვისი 10 წლისაა. სერვისის ცხოვრების ვადის ამოწურვის შემდეგ დაუკავშირდით მწარმოებელს.

შენახვის ვადა — 3 წელი

პროდუქტის გარანტია პერიოდი იყიდება 5 წლის ვადისაგან

 

Характеристики
Вес
0.1 кг
Габариты
902 × 36 × 645 мм
Номинальное фазовое/линейное напряжение
Гармоничный состав напряжения

ДСТУ EN 50160:2014

Диапазон регулирования по Umin

Диапазон регулирования по Umax

Диапазон регулирования времени срабатывания защиты

0-10

Диапазон регулирования времени АПВ

0-600

Потребляемая мощность (под нагрузкой),не более Вт

1,2

Сечение проводов для подключения к клеммам

0,5-1,5

Страна производитель

უკრაინა

Отзывы (0)
Оставьте отзыв первым.
Написать отзыв
Хит
- 15 %

Three-phase voltage relay RNPP-311M

₾ 100 Первоначальная цена составляла ₾ 100.₾ 85Текущая цена: ₾ 85.
1 в наличии (может быть предзаказано)
Описание

Three-phase voltage relay RNPP-311M.

RELAY OF VOLTAGE, SWIP AND SEQUENCE OF PHASES
RNPP-311M

These devices are used to protect three-phase devices from poor quality
mains voltage. Installed in control cabinets and power shields. Wide
used in the automatic input reserve switchboards as a network control authority.

It monitors the violation of the phase rotation, the effective value of the voltage.
Protects three-phase electrical equipment from accidents:
— output voltage values ​​outside the installation limits
— violation of the sequence and sticking phases
— violations of full-phase and symmetrical mains voltage.

Possibility of a choice of controlled voltage of 400/415 V
Ability to turn off phase rotation control:
-sequences and sticking phases;
— full-phase and symmetrical mains voltage;
— undervoltage;
— increased voltage.
The relay is an indispensable element of any ABP circuits, as well as power management circuits.

RNPP-311M is intended:
— to control the allowable voltage level;
— to control the correct alternation and the absence of sticking phases;
— to control the full phase and symmetry of the mains voltage (phase skew);
— to disconnect the load in case of poor-quality mains voltage;
— to control the quality of the mains voltage after load shedding and automatic switching on
its after the restoration of the voltage parameters;
— to indicate the accident in case of emergency and indicate the presence of voltage
on each phase.
RNPP-311M controls the zero by indirect method.
The product provides the possibility of adjusting parameters (voltage threshold,
AR time and protection delay time), selection of the voltage of the controlled network (400 V
or 415 B) and a set of protective functions.
After the restoration of the network voltage parameters, the product re-switches on the load after the ARC time.

The product is intended for use in the following conditions:
— ambient temperature from minus 35 to +55 ºС;
— atmospheric pressure from 84 to 106.7 kPa;
— relative air humidity (at temperature +25 ºС) 30 … 80%

ATTENTION! The product is not intended for use in the following conditions:
— significant vibration and shock;
— high humidity;
— aggressive environment with content in the air of acids, alkalis, etc., as well as heavy pollution
(fat, oil, dust, etc.).

 

 

 

SPECIFICATIONS

Name Значение
Nominal linear / phase mains supply voltage, V 400 / 230, 415 / 240
Network frequency, Hz 45 – 65
Harmonic composition (non-sinusoidal) supply voltage ДСТУ EN 50160:2014
The range of regulation of the threshold for the minimum supply voltage, as a percentage of the nominal voltage 5 – 50
Regulation range of protection response time, s 0 – 10
Range of regulation of time of AR, with 0 – 600
Fixed response delay for the minimum voltage, with 12*
Reaction time at break of one of phases, with, no more 0,2
Ready time at supply voltage, s, not more 0,2**
The magnitude of the determination of phase skew, V 30
Voltage hysteresis, V 5 – 6
Hysteresis on phase bias, V 5 – 6
Accuracy of voltage threshold determination, V, not more 3
Accuracy of determination of phase skew,%, not more 2
Voltage at which performance is maintained:-по одной фазе, В
— in three phases, V
140 – 450
95 – 450
Power consumption (under load), W, not more 1,2
Maximum switching current of output contacts, A 5
Switching resource of output contacts:

— under load 5 А (cos φ = 1.0), times, not less

— under load 1 А (cos φ = 1.0), times, not less

100 тыс.
1 млн.
Purpose of the product Аппаратура управления и
распределения.
Nominal operation Продолжительный
Degree of protection of the front panel IP40
Terminal block protection IP20
Electric shock class II
Climatic performance УХЛ 3.1
Permissible degree of pollution II
Overvoltage category II
Rated insulation voltage, V 450
Rated impulse withstand voltage, kV 2,5
Wire cross section for connection to terminals, mm² 0,5-1,5
Tightening torque screws terminal, N * m 0,4
Weight, kg, not more 0,100
Overall dimensions (Fig. 1), H * B * L, mm 90,2*36*64,5
Installation (mounting) of the product — standard DIN rail 35 mm
The product maintains its performance at any position in space.
Body material — self-extinguishing plastic
Notes:
* — if the accident occurred at the minimum voltage, the fixed response time of the product
will be 12 s, provided that the switches Umax and Umin are in the left position.
With any other combination of switches Umax and Umin, the product will work through the delay time,
User-defined handle Toff (sec). If during this time (12 s) another accident occurs,
for example, the maximum voltage, the product will work for the least of the periods — through time
delays specified by the User, or after a time remaining of 12 s.
** — when operating in the “Overvoltage control” mode, the ready time is 0.3 s.

SERVICE LIFE AND WARRANTY OF THE MANUFACTURER

 

The service life of the product is 10 years. Upon expiration of the service life, contact the manufacturer.

Shelf life — 3 years

The warranty period of the product is 5 years from the date of sale

 

Характеристики
Вес
0.1 кг
Габариты
902 × 36 × 645 мм
Номинальное фазовое/линейное напряжение
Гармоничный состав напряжения

ДСТУ EN 50160:2014

Диапазон регулирования по Umin

Диапазон регулирования по Umax

Диапазон регулирования времени срабатывания защиты

0-10

Диапазон регулирования времени АПВ

0-600

Потребляемая мощность (под нагрузкой),не более Вт

1,2

Сечение проводов для подключения к клеммам

0,5-1,5

Страна производитель

UKRAINA

Отзывы (0)
Оставьте отзыв первым.
Написать отзыв

Copyright ©2018, Bastion LTD

48059213